Oxigraf, Inc.
Oxigraf, Inc.
238 E Caribbean Dr,
Sunnyvale, CA 94089
Phone: 650-237-0155
Email: sales@oxigraf.com
Print Back
The Model O2DAL is a general purpose oxygen analyzer for research, air separation monitoring, and industrial monitoring applications. The Model O2DAL is designed to measure oxygen in a range of 5-100% levels and operates in XC and LN mode for reliable measurements in the presence of other gases including Ar, He, H2, CO2 and non-condensing H2O vapors. The Model O2DAL features an easy to use and bright LED display, touch panel controls, easy calibratiom, and has a high flow micro pump for low pressure operation from 1200 to 55mbar (0-60,000 feet altitude) and internal flow meter for monitoring flow in the system. A terminal strip on the rear panel is included for analog relay alarm outputs , 4-20 mA outputs, and an analog 0-1.0 VDC output is on a BNC connector. A DB-9 connector RS-232 digital output provides digital serial communications and is compatible with Oxisoft software. The unit has CPC O-ring quick connect inlet fittings for industrial applications.
Unit of Measure

Performance Conditions

Ambient Temperature (Operating)

 N/A 5 to 40 ºC40 to 105 ºF

Ambient Temperature (Storage)

 N/A -20 to 60 ºC-2 to 140 ºF

Cell Pressure

 N/A 2.2 to 17.4 psi15 to 120 kPascal112 to 900 mmHg150 to 1200 Mb

Warm-up for Full Accuracy

 N/A 10 min

Altitude

 N/A Two point calibration required after change in altitude of 2000 feet

Humidity

 N/A 0 to 95%, non-condensing

Performance Specifications

Range

 N/A 5 to 100%

Resolution

 N/A 0.1%

Stability (24 hrs)

 N/A ± 0.3%

Linearity

 N/A ±0.2%

Cross Sensitivity

 N/A ±0.2% in XC mode.

Input Pressure

 N/A -0.03 to 1.3 psi

Flow

 N/A 0 to 250 ml/min pump on 50 to 500 ml/min pump off

Response Time

 N/A 150 ms at 250 ml/min, electronic Filter setting 0 to 3

Alarms (4)

 N/A Low Flow Oxygen A Oxygen B System Check

Relays

 N/A Form C (SPDT), 5 A, 250 VAC rating.

Analog Output

 N/A 0 – 1 V, 1V = 100%. 4 – 20 mA programmable from front panel

Sample Inlet

 N/A CPC O-ring quick connects, 1/8 “ flex tubing barbs std.

Electrical Specifications

Sensor Power Requirements

 N/A 0.8 A typical 12 ± 0.6 VDC 2.5 A max

External Power Supply

 N/A 100 to 250 VAC 47 to 63 Hz

Mechanical Specifications

Dimensions (W x H x D)

 N/A 7.5x3.0x14.0 in190x76x356 mm

Weight Instrument

 N/A 4 Pound1.8 Kilogram