Search Catalog
 All Categories    Laboratory & Research
All Categories > Oxygen Analyzers by Application > Laboratory & Research  

Laboratory & Research

Click on a Product to view details.


O2 Oxygen Analyzer

Oxygen Analyzer for fast response and research applications.

The Model O2 is a versatile research grade oxygen analyzer for measuring 5-100% oxygen concentrations. The unit includes an integrated gas sampling pump, flow controller, bright LED display for oxygen concentration and status indication, touch panel controls for ease of operation, 0-1Volt DC analog and a terminal strip with relay outputs and a 4-20ma analog output, a separate digital RS-232 output, and LEUR type front panel connection for response times. The front panel allows control of flow, alarm set-points, calibration, and other user features. The Model O2 can be used in research and other applications, but not approved for human medical use or diagnostics. Oxigraf ...

O2Bio Gas Analyzer

Bioreactor Off-Gas Monitoring of O2 and CO2

Based on the Oxigraf Model O2Cap Oxygen and CO2 analyzer, the O2Bio is specifically designed to provide gas monitoring of Bioreactor headspace and off-gas streams. The unit will measure continuously from an off-gas vent or periodically via a gas sample valve to take small 10-15ml samples from the bioreactor headspace via keypad or digital interface control.

The O2Bio integrates an Oxigraf tunable diode laser (TDL) oxygen sensor and a non-dispersive infrared (NDIR) CO2 sensor with a pump regulated gas sampling system. The analyzer features a bright vacuum fluorescent alphanumeric display (VFD), touch panel keypad, a rear 0-1VDC analog BNC output for O2 readings, rear terminal ...


O2C and O2D Oxygen Analyzer


The Models O2C and O2D are general purpose oxygen analyzers for research, air separation monitoring, and industrial monitoring applications. Designed to measure oxygen in a range of 5-100% accurately and in the presence of other gasses such as including Ar, He, H2, CO2 and non-condensing H2O vapors. The Model O2C features an internal pressure regulator to connection to 1-75 psig source and the Model O2D features a sampling pump for flow control.


O2Cap Oxygen Analyzer for Capnography


The O2Cap family integrates an Oxigraf oxygen sensor with a NDIR CO2 sensor for dual gas measurements for research, industrial and laboratory measurements. Measure Oxygen concentrations from 5-100% and CO2 from 0-10%. Perform capnography tests with fast breath by breath measurement. The units come with a pump for gas sampling system, bright vacuum fluorescent alphanumeric display (VFD), touch panel keypad, a rear 0-1VDC analog output for O2 readings, and either a rear terminal strip with limit detection relays and 4 – 20 mA analog outputs or a second CO2 analog output, and a RS232 digital interface.

The model O2Cap and O2CapB have luer type front panel gas sample input fitting for research applications. The model O2CapD ...

Oxygen Safety Monitor

O2iR Chamber Atmosphere Monitor and Controller

Now you can control oxygen and carbon dioxide levels in research chambers with a response time of less than 1 second. Monitor up to four (4) animal or plant atmosphere environments with a single controller.

Here is a truly digital oxygen analyzer with analog and digital interfaces for control, display, and data-logging of oxygen and CO2 parameters.

The Oxigraf O2iR may be the chamber controller you need.

  • Fast response
  • Reliable laser diode technology
  • Pressure and temperature correction
  • Remote display and maintenance
  • Insensitive to movement
  • Coded password access
  • Sample flow monitor

O2L High Resolution Oxygen Analyzer with Relay and Analog Output

The Model O2L is a general purpose oxygen analyzer for research, fuel and combustion system monitoring, food processing and packaging, pharmaceutical manufacturing, automotive engine analysis, and purge verification applications. The Model O2L is designed to measure oxygen in a range of 0-100% levels with resolution of 0.01 % from 0-10% and 0.1% from 10-100%. The unit operates in LN (low noise) mode for smooth readings and the measurements are made independent of sample pressure, gas temperature and other gases including CO2 and H2O. Gases other than oxygen will, in most cases not affect the measurement except for their dilution effect on the gas mixture. The Model O2L features an easy to use and feature bright LED displays, touch ...


O2Mix O2 and CO2 Gas Mixer

Overlay and Sparge Gas Controller for Bioreactors.

The Model O2MIX gas mixer measures the oxygen and CO2 concentration in a gas sample inside instrument and uses this as feedback to control three (3) proportional valves to blend gasses from the three (3) inputs to a single output. The product uses feedback from actual gas measurements as a control point and different mixture and blends of gasses can be used to feed three (3) inputs for mixing. In normal operation the O2MIX is designed to accept Oxygen, Nitrogen (or Compressed “Air”) and CO2 as inputs, and a single blended output of a programmed mixture is produced by the unit to feed a Bioreactor.

  • Accurately mixes O2 and/or CO2 with air or nitrogen by ...

O2TR and O2T Oxygen Analyzers


The Model O2T and O2TR are oxygen analyzers for medical oxygen trans-filling and verification and designed for measuring 5-100% oxygen in nitrogen. These units are easy to use and feature bright LED displays, touch panel controls, easy calibration, a sample pump or regulator for flow control depending on model, and CPC front panel fittings. The Model O2T has a built-in sampling pump with flow from 0-250ml/minute. The Model O2TR has a built in regulator for flow control and features a simplified two (2) point calibration control on the front panel. Comes with a carrying case and optional printer and rechargeable DC battery pack for portable use.

Step-Up from other measurement technologies:

  • NO errors due to ...
Site created by Thomas Web Solutions
Oxigraf, Inc.