Item # 07-7016, Model O2DAL, Oxygen, Single Channel, Table Top On Oxigraf, Inc.

Search Catalog



	All Categories O2C , O2D and O2DAL Oxygen Analyzers

All Categories > Oxygen Analyzers by Application > Medical & Healthcare Oxygen Analyzers > O2C , O2D and O2DAL Oxygen Analyzers > Item # 07-7016


	Item # 07-7016, Model O2DAL, Oxygen, Single Channel, Table Top

larger image

The Model O2DAL is a general purpose oxygen analyzer for research, air separation monitoring, and industrial monitoring applications. The Model O2DAL is designed to measure oxygen in a range of 5-100% levels and operates in XC and LN mode for reliable measurements in the presence of other gases including Ar, He, H2, CO2 and non-condensing H2O vapors. The Model O2DAL features an easy to use and bright LED display, touch panel controls, easy calibratiom, and has a high flow micro pump for low pressure operation from 1200 to 55mbar (0-60,000 feet altitude) and internal flow meter for monitoring flow in the system. A terminal strip on the rear panel is included for analog relay alarm outputs , 4-20 mA outputs, and an analog 0-1.0 VDC output is on a BNC connector. A DB-9 connector RS-232 digital output provides digital serial communications and is compatible with Oxisoft software. The unit has CPC O-ring quick connect inlet fittings for industrial applications.

Performance Conditions · Performance Specifications · Electrical Specifications · Mechanical Specifications

Performance Conditions

Ambient Temperature (Operating)		5 to 40 ºC 40 to 105 ºF

Ambient Temperature (Storage)		-20 to 60 ºC -2 to 140 ºF

Cell Pressure		2.2 to 17.4 psi 15 to 120 kPascal 112 to 900 mmHg 150 to 1200 Mb

Warm-up for Full Accuracy		10 min

Altitude		Two point calibration required after change in altitude of 2000 feet

Humidity		0 to 95%, non-condensing

Performance Specifications

Range		5 to 100%

Resolution		0.1%

Stability (24 hrs)		± 0.3%

Linearity		±0.2%

Cross Sensitivity		±0.2% in XC mode.

Input Pressure		-0.03 to 1.3 psi

Flow		0 to 250 ml/min pump on 50 to 500 ml/min pump off

Response Time		150 ms at 250 ml/min, electronic Filter setting 0 to 3

Alarms (4)		Low Flow Oxygen A Oxygen B System Check

Relays		Form C (SPDT), 5 A, 250 VAC rating.

Analog Output		0 – 1 V, 1V = 100%. 4 – 20 mA programmable from front panel

Sample Inlet		CPC O-ring quick connects, 1/8 “ flex tubing barbs std.

Electrical Specifications

Sensor Power Requirements		0.8 A typical 12 ± 0.6 VDC 2.5 A max

External Power Supply		100 to 250 VAC 47 to 63 Hz

Mechanical Specifications

Dimensions (W x H x D)		7.5x3.0x14.0 in 190x76x356 mm

Weight Instrument		4 Pound 1.8 Kilogram

DOWNLOADS


		Fast Oxygen Analyzer O2C/D (PDF, 111KB)

Options & Accessories (O2C & O2D)



	Options & Accessories (O2C & O2D)

Item # 07-7016, Model O2DAL, Oxygen, Single Channel, Table Top

Ambient Temperature (Operating)

Ambient Temperature (Storage)

Cell Pressure

Warm-up for Full Accuracy

Altitude

Humidity

Range

Resolution

Stability (24 hrs)

Linearity

Cross Sensitivity

Input Pressure

Flow

Response Time

Alarms (4)

Relays

Analog Output

Sample Inlet

Sensor Power Requirements

External Power Supply

Dimensions (W x H x D)

Weight Instrument