Item # 07-0031, O2T, Oxygen, Single Channel, Table Top On Oxigraf, Inc.

Search Catalog



	All Categories O2TR and O2T Oxygen Analyzers

All Categories > Oxygen Analyzers by Products > O2TR and O2T Oxygen Analyzers > Item # 07-0031


	Item # 07-0031, O2T, Oxygen, Single Channel, Table Top

larger image

The Model O2T oxygen analyzer for medical oxygen trans-filling and verification is designed for measuring 5-100% oxygen in nitrogen. The unit features an easy to use and feature bright LED displays, touch panel controls, easy calibration, and a CPC front panel fittings. The Model O2T has a built-in sampling pump with flow from 0-250ml/minute.

Step-Up from other measurement technologies:

NO errors due to vibration and movement
NO errors due to temperature changes
NO errors due to changes in barometric pressure
Fast response in seconds to conserve gas

Specifications · Performance Specifications · Electrical Specifications · Features & Applications

Specifications

Range		5 to 100% oxygen, in nitrogen or air mixtures.

Resolution		0.1%

Sample Flow		0 to 250 ml/min pump on 50 to 500 ml/min pump off

Input Pressure		-0.03 to 1.3 psi

Response Time		Approximately 400 ms @ 200 ml/min flow (@ electronic filter setting of 7).

Stability (4 hrs)		±0.1% after 5 minute warm up.

Dimensions (W x H x D)		7.5 x 3.0 x 11.0 in 190 x 76 x 280 mm

Weight Instrument		5 Pound 2.3 Kilogram

Weight Power Module		1.5 Pound 0.7 Kilogram

Warranty		One-year repair or replacement limited warranty

Performance Specifications

Ambient Temperature Storage		-20 to 60 ºC -2 to 140 ºF

Ambient temperature Operating		5 to 40 ºC 40 to 102 ºF

Cell Pressure		70 to 120 kPa 500 to 900 mmHg 10.2 to 17.4 psi

Warm-up for Full Accuracy		5 min

Altitude		Two point calibration required after change in altitude of 2000 feet

Room Humidity		0 to 95%, non-condensing

Electrical Specifications

Sensor Power Requirements		0.8 A typical 12 ± 0.6 VDC 2.5 A max

External Power Supply		47 to 63 Hz 95 to 250 VAC

Features & Applications

All FDA requirements for U.S.P. oxygen analysis have been met or exceeded.
Corrects measurements for pressure changes and temperature automatically.
Single mode laser diode absorption spectroscopy oxygen analysis.
Easy to calibrate - no screwdrivers, no waiting; Zero not required.
Electronic sample gas flow meter and pump included.
Annual factory re-certification not required.
Measurement range from 5% to 100%.
Effortless setup and operation.
Bright LED display
Verification of transited oxygen purity.
Oxygen equipment performance analysis.
Welding gas mixture oxygen analysis.

DOWNLOADS


		Oxigraf-Oxygen-Analyzer-for-Oxygen-Transfilling (PDF, 492KB)

Options & Accessories (O2TR & O2T)



	01-0151 Black Nylon Carrying Case



	07-0041 Calibration Kit (99.99% O2 and 21.00% Oxygen)

more available ..

Item # 07-0031, O2T, Oxygen, Single Channel, Table Top

Range

Resolution

Sample Flow

Input Pressure

Response Time

Stability (4 hrs)

Dimensions (W x H x D)

Weight Instrument

Weight Power Module

Warranty

Ambient Temperature Storage

Ambient temperature Operating

Cell Pressure

Warm-up for Full Accuracy

Altitude

Room Humidity

Sensor Power Requirements

External Power Supply