The Model O2TR oxygen analyzers for medical oxygen trans-filling and verification is designed for measuring 5-100% oxygen in nitrogen. The unit features an easy to use and feature bright LED displays, touch panel controls, easy calibration, and a CPC front panel fittings. The Model O2TR has a built in regulator for flow control and features a simplified two (2) point calibration control on the front panel.

Step-Up from other measurement technologies:

  • NO errors due to vibration and movement
  • NO errors due to temperature changes
  • NO errors due to changes in barometric pressure
  • Fast response in seconds to conserve gas
Unit of Measure

Specifications

Range

N/A 5 to 100% oxygen, in nitrogen or air mixtures.

Resolution

N/A 0.1%

Sample Flow

N/A 50 to 500 ml/min

Input Pressure

N/A 1 to 75 psi

Response Time

N/A Approximately 400 ms @ 400 ml/min flow (@ electronic filter setting of 7).

Stability (4 hrs)

N/A ±0.1% after 5 minute warm up.

Dimensions (W x H x D)

N/A 7.5 x 3.0 x 11.0 in190 x 76 x 280 mm

Weight Instrument

N/A 5 Pound2.3 Kilogram

Weight Power Module

N/A 1.5 Pound0.7 Kilogram

Warranty

N/A One-year repair or replacement limited warranty

Performance Specifications

Ambient Temperature Storage

N/A -20 to 60 ºC-2 to 140 ºF

Ambient temperature Operating

N/A 5 to 40 ºC40 to 102 ºF

Cell Pressure

N/A 70 to 120 kPa500 to 900 mmHg10.2 to 17.4 psi

Warm-up for Full Accuracy

N/A 5 min

Altitude

N/A Two point calibration required after change in altitude of 2000 feet

Room Humidity

N/A 0 to 95%, non-condensing

Electrical Specifications

Sensor Power Requirements

N/A 0.8 A typical 12 ± 0.6 VDC 2.5 A max

External Power Supply

N/A 47 to 63 Hz 95 to 250 VAC

Features & Applications

N/A

  • All FDA requirements for U.S.P. oxygen analysis have been met or exceeded.
  • Corrects measurements for pressure changes and temperature automatically.
  • Single mode laser diode absorption spectroscopy oxygen analysis.
  • Easy to calibrate - no screwdrivers, no waiting; Zero not required.
  • Annual factory re-certification not required.
  • Measurement range from 5% to 100%.
  • Effortless setup and operation.
  • Bright LED display
  • Verification of transited oxygen purity.
  • Oxygen equipment performance analysis.
  • Welding gas mixture oxygen analysis.